Wet Area Putty 56.8grams Blister BS-8139 Bossil

Applications:

After proper mixing, the epoxy putty molds like clay and may be used to patch dings, scratches, cuts, gouges, and rebuild holes in fiberglass, metal, and wooden boat decks and hulls; to repair fittings, pipes, electrical connections, leaking gaskets, water tanks, fish boxes, marine recreational equipment, tubs, battery cases, sinks, spas, hot tubs, gutters, tanks, pools; to form custom gaskets. It is ideal for repairs to damp wet areas and underwater applications; cures to fiberglass white color. Suitable for interior and exterior use.

Directions:

1. Before applying, roughen and clean the area to be repaired.
2. Cut or twist off required amount.
3. Mix by kneading into a uniform color. If mixing is difficult, warm the epoxy putty to room temperature or slightly higher, or dampen fingers for easier mixing and application.
4. As the epoxy putty is mixed, the two contrasting colors will blend into one color to indicate complete mixing.
5. Apply to surface to be repaired (within 2 minutes of mixing).
6. Force into any cracks or holes and strike off excess material before hardening begins, preferably with a tool wet with clean water.
7. When applying to a damp, wet or slowly leaking area, work the material forcefully into the surface and apply pressure until adhesion begins to take effect.