Weicon Punch Down Tool LSA Sensor No. 40 52000040

With the sensor No. 40 wires with a cable diameter of 0.35 - 0.9 mm and a wire diameter of 0.7 - 2.6 mm can be connected to LSA strips or blocks. By lightly pressing the tool, wires are contacted and cut off in just one operation. Manual stripping or screwing is not required. The built-in scissors can be switched off if required, for example if cutting a wire residue is not desired. A sensor ensures that the scissors are not activated until the wire has been pressed deep enough into the contact. The sensor can be deactivated (OFF) for double circuits of contacts. Furthermore, the LSA sensor No. 40 via a fold-out draw hook for removing wires from the LSA contact as well as via a fold-out release blade for releasing LSA modules from the mounting bracket. The tool
is designed for up to 200,000 circuits (with 0.4 mm wire diameter).